Vee Packings Select subcategory

Subcategories

• 

  Standard Vee Packing

  #V     PSI 2       250 3       500 4     3000 5     5000 6   10000 7   15000

  NF Nylon Female  FF Fabric Female BV Buna Vee HV Hytrel Vee   FFV Fabric Vee  NM Nylon Male FM Fabric Male

  -40/250F [-40/121C] -40/250F [-40/121C] -40/250F [-40/121C] -40/300F [-40/189C] -40/250F [-40/121C] -40/250F [-40/121C] -40/250F [-40/121C]

  Standard Vee-Packings are popular sealing devices for both pneumatic and hydraulic applications.  Usually supplied as a multi-ring sealing unit, a set is made up of a given number of intermediate vee-rings as well as a male and female adapter to insure proper support.  Available in both homogeneous and fabric reinforced materials for intermediate rings and in fabric-reinforced and nylon materials for the adapter rings, vee-packings are used to seal both piston and rod applications in standard as well as telescopic cylinder models.

• 

  Standard Vee Sets

  Nylon/Hytrel/Caoutchouc toilé -40/230F [-40/110C] 10 000 PSI [689 Bar]

  
  Standard Vee Sets are pre-packaged assemblies comprising of 3 fabric reinforced pressure rings, 2 homogeneous pressure rings and nylon male and female adapters.  These pre-packaged sets facilitate your ordering and stocking duties and are available in a wide variety of sizes.

• 

  "Hydrolock" Vee Set

  Hytrel/Nylon -40/250F [-40/121C] 6000 PSI [414 Bar]

  
  “Hydrolock” Vee Sets are supplied as multiple-lip, non adjustable designs.  Made of both Nylon and Hytrel intermediate (pressure) rings, they can withstand high pressures and shock loads and can also be supplied with glass-filled Nylon support bearings and guide-locking rings, (sold separately).

   

• 

  Guidelocks

  Nylon -40/250F [-40/121C]

  These guide-locking rings serve to retain the «Hydrolock» vee sets when mounted on the piston as well as offering additional bearing surface for better support.

• 

  Vee Coil

  Neo-Fabric -40/250F [-40/121C] 5000 PSI [345 Bar]

  Typically supplied in coil form, this type of vee-packing can be pre-split to almost any diameter and stack height requirement.  They are available in intermediate, male and female profiles and in a variety of cross-sectional sizes to insure quick turnaround time.