Vee Packings


Enabled filters:


Vee Packings


Vee Packings Select subcategory


  • Standard Vee Packing

    #V     PSI

    2       250

    3       500

    4     3000

    5     5000

    6   10000

    7   15000

    NF Nylon Female 

    FF Fabric Female

    BV Buna Vee

    HV Hytrel Vee  

    FFV Fabric Vee 

    NM Nylon Male

    FM Fabric Male

    -40/250F [-40/121C]

    -40/250F [-40/121C]

    -40/250F [-40/121C]

    -40/300F [-40/189C]

    -40/250F [-40/121C]

    -40/250F [-40/121C]

    -40/250F [-40/121C]


    Standard Vee-Packings are popular sealing devices for both pneumatic and hydraulic applications.  Usually supplied as a multi-ring sealing unit, a set is made up of a given number of intermediate vee-rings as well as a male and female adapter to insure proper support.  Available in both homogeneous and fabric reinforced materials for intermediate rings and in fabric-reinforced and nylon materials for the adapter rings, vee-packings are used to seal both piston and rod applications in standard as well as telescopic cylinder models.

  • Standard Vee Sets

    Nylon/Hytrel/Caoutchouc toilé

    -40/230F [-40/110C]

    10 000 PSI [689 Bar]


    Standard Vee Sets
    are pre-packaged assemblies comprising of 3 fabric reinforced pressure rings, 2 homogeneous pressure rings and nylon male and female adapters.  These pre-packaged sets facilitate your ordering and stocking duties and are available in a wide variety of sizes.

  • "Hydrolock" Vee Set


    -40/250F [-40/121C]

    6000 PSI [414 Bar]


    “Hydrolock” Vee Sets
     are supplied as multiple-lip, non adjustable designs.  Made of both Nylon and Hytrel intermediate (pressure) rings, they can withstand high pressures and shock loads and can also be supplied with glass-filled Nylon support bearings and guide-locking rings, (sold separately).


  • Guidelocks


    -40/250F [-40/121C]



    These guide-locking rings serve to retain the «Hydrolock» vee sets when mounted on the piston as well as offering additional bearing surface for better support.

  • Vee Coil


    -40/250F [-40/121C]

    5000 PSI [345 Bar]



    Typically supplied in coil form, this type of vee-packing can be pre-split to almost any diameter and stack height requirement.  They are available in intermediate, male and female profiles and in a variety of cross-sectional sizes to insure quick turnaround time.