O'Rings

Catalog

Enabled filters:
ID
OD

Information

O'Rings
                                                         oring02.jpg                   

O'Rings There are 4356 products.

Subcategories

  • 2-XXX
    NBR 70A spacer25x25.png -40/250F[-40/121C]  spacer25x25.png
    NBR 90A -40/250F[-34/121C]
    FPM 75A -15/400F[-26/205C]
    FPM 90A -15/400F[-26/205C]
    AFLAS 75 -25/450F[0-2/230C]
    EPDM 70 -70/250F[-57/121C]
    HNBR 70 -40/300F[-40/150C]
    HNBR 80 -40/300F[-40/150C]
    SILICONE 70 -65/450F[-54/232C]
    AU 90 -60/250F[-51/121C]
    V.PTFE -320/450F[-196/232C]
  • 3-XXX
    NBR 70A spacer25x25.png -40/250F[-40/121C]  spacer25x25.png
    NBR 90A -40/250F[-34/121C]
    FPM 75A -15/400F[-26/205C]
    FPM 90A -15/400F[-26/205C]
    AFLAS 75 -25/450F[0-2/230C]
    EPDM 70 -70/250F[-57/121C]
    HNBR 70 -40/300F[-40/150C]
    HNBR 80 -40/300F[-40/150C]
    SILICONE 70 -65/450F[-54/232C]
    AU 90 -60/250F[-51/121C]
    V.PTFE -320/450F[-196/232C]
  • 4-XXX
    NBR 70A spacer25x25.png -40/250F[-40/121C]  spacer25x25.png quadring.png
    NBR 90A -40/250F[-34/121C]
    FPM 75A -15/400F[-26/205C]
    FPM 90A -15/400F[-26/205C]
    AFLAS 75 -25/450F[0-2/230C]
    EPDM 70 -70/250F[-57/121C]
    HNBR 70 -40/300F[-40/150C]
    HNBR 80 -40/300F[-40/150C]
    SILICONE 70 -65/450F[-54/232C]
    AU 90 -60/250F[-51/121C]
    V.PTFE -320/450F[-196/232C]
  • TS-XXX
    NBR 70A spacer25x25.png -40/250F[-40/121C]  spacer25x25.png square-rings_1.png
    NBR 90A -40/250F[-34/121C]
    FPM 75A -15/400F[-26/205C]
    FPM 90A -15/400F[-26/205C]
    AFLAS 75 -25/450F[0-2/230C]
    EPDM 70 -70/250F[-57/121C]
    HNBR 70 -40/300F[-40/150C]
    HNBR 80 -40/300F[-40/150C]
    SILICONE 70 -65/450F[-54/232C]
    AU 90 -60/250F[-51/121C]
    V.PTFE -320/450F[-196/232C]
  • O'Ring Cord
    NBR 70A spacer25x25.png -30/250F[-34/121C]  spacer25x25.png ur.jpg
    FPM 75A -15/400F[-26/205C]
    EPDM 80A -65/300F[-54/149C]
    SILICONE 70A -65/450F[-54/232C]

    O'Ring cord is supplied as a continuously extruded profile. O'Ring cord can be used to manufacture custom O'Rings when no standard size is available. A wide variety of cross-sections and sizes are available.
  • ED - DIN Connector Rings
           
    Nitrile
    /N
      -65/225F [-54/107C] joint-ed_web.png
    Fluorocarbon
    /V
    -65/225F [-54/107C]
    Ethylene-Propylene
    /E
    -65/225F [-54/107C]


    ED-Style
    sealing rings are mostly used to seal threaded tube connections and fittings. As torque is applied to the connector, the elastomeric seal material is compressed to form a positive sealing line, and its special geometry keeps it from twisting during installation.

  • CAT Hydraulic Hose...
      O'Ring Style Cat_hose_coupling_jpg6003d.jpg
       D'Ring Style
  • 8-XXX
    Nitrile NBR 90A Black N90 -40/250F [-40/121C]
    Polyurethane AU 95A Black/Clear U -60/250F [-51/121C]
    Polytetrafluoroethylene PTFE 55D White T -320/450F [-196/232C]
    Polymyte TPE 56D Orange P -65/275F [-54/135C]
    Hytrel TPC - ET 55D Black/Orange H -60/275F [-51/135C]
  • 8700

    Back-up Rings

    Polymyte®
    SD/P - ST/P

    -65/275F [-50/135C]

    V.PTFE
    SD/T - ST/T

    -320/450F [-196/232C]

    ur.jpg


    8700-style back-up rings provided added extrusion resistance to U-Cups and similar seals with only minimal increase in gland width. They are designed to increase the pressure rating of softer elastomeric materials when higher pressures may cause extrusion problems.
  • Head Seals


    Polyurethane

    Low Extreme

    -65F [-54C]

    Normal operation

    -40/250F [-40/121C]

    High Extreme

    265F [129C]

         ur.jpg


    Head seals are used in static applications as replacements to O'Ring/Back-up assemblies. High performance material and a symmetrical geometry greatly reduces the risk of installation damage and extrusion at higher pressures. This product offers an improved fit and a more stable profile once installed in the housing.

  • SFS

    Flange seals

    Polyurethane

    -40/195F [-40/90C]

     

    ur.jpg

    SFS flange seals are designed to retrofit O'Rings on all 4-bolt flanges such as shown in SAE standard J518C Code 61/62. The polyurethane material offers extended service life, improved extrusion resistance and easy installation. 
  • PFS

    Flange seals

    Polyurethane

    -40/212F [-40/100C]

     

    ur.jpg

    PFS flange seals are designed to retrofit O'Rings on all 4-bolt flanges such as shown in SAE standard J518C Code 61/62. The polyurethane material offers extended service life, improved extrusion resistance and easy installation. 
  • BS400

    Bonded Seals

    Carbon Steel/Nitrile

    -30/225F [-34/107C]

     

    ur.jpg

    Bonded seals are used to seal off potential leak paths on bolts and other similar fasteners. They are designed to create a predetermined sealing line once the fastener has been tightened, as the rubber element will close off the clearance gap. Bonded seals are intended to take the place of an O'Ring in certain assemblies. By using a bonded seal, there is no need to a machine and O'Ring groove in the mating part.

  • BS400SC

    Bonded Seals

    Self Centering

    Carbon Steel/Nitrile

    -30/225F [-34/107C]

     

    ur.jpg



    Bonded seals are used to seal off potential leak paths on bolts and other similar fasteners. They are designed to create a predetermined sealing line once the fastener has been tightened, as the rubber element will close off the clearance gap. Bonded seals are intended to take the place of an O'Ring in certain assemblies. By using a bonded seal, there is no need to a machine and O'Ring groove in the mating part.

  • 600

    Fastener seals

    Cadmium Plated Steel/Nitrile

    -30/225F [-34/107C]

    ur.jpg


    Fastener seals are primarily used to seal bolts around the smooth area of the bolt shaft. They feature an elastomeric sealing element molded in place inside a metal retainer. It offers a one-piece sealing unit that avoids having to machine an O'Ring groove in the mating hardware.
  • 7500

    Thread seal

    Steel/Nitrile

    -30/225F [-34/107C]


    ur.jpg

    Similar in design to the 600-series Fastener Seal, the Thread Seal features a triangular sealing element that allows it to seal anywhere along the threaded surface of the mating fastener.
  • D-Ring

    D-Ring

    Polyurethane

    -65/275F [-54/135C]


    autocad_dring_en.png
    RESILON® D-RING SEAL
    High-performance polyurethane solution extends seal life with one-piece design For hydraulic valves.
per page
Showing 1 - 12 of 4356 items
Showing 1 - 12 of 4356 items